18 on USL2: radius = 106.892pt ⇒ diameter ≈ 2.97″ ≈ 75.4mmGlenn E. wrote:A generic example of 20-up … a non-generic example of 18-up

20 on USL2: radius = 104.202pt ⇒ diameter ≈ 2.89″ ≈ 73.5mm

Moderators: Glenn E., Roy Hersh, Andy Velebil
18 on USL2: radius = 106.892pt ⇒ diameter ≈ 2.97″ ≈ 75.4mmGlenn E. wrote:A generic example of 20-up … a non-generic example of 18-up
I printed them out and will test. And I'll start a new thread with the results and discussion.Julian D. A. Wiseman wrote:Enough theory. Test.
At 100% size (not a default of 96%) print the 17"×11" pages of www.jdawiseman.com/2016/20160113_USL2_test.pdf. Take home. Set out the glasses you would use at your tasting. How many glasses are on the last page that is still comfortable to use? That is the answer.
Please post in the software thread.Eric Menchen wrote:I printed them out and will test. And I'll start a new thread with the results and discussion.
Only with those SZ Port Wine glasses. We used 18-up and 20-up at the FTLOP 10th Anniversary tasting, which you attended, and they worked fine with the INAO tasting glasses from Marjorie Lumm. Both placemats are pretty densely packed, but no one broke any glasses or spilled any Port so it didn't seem to be a problem.Andy Velebil wrote:So 16 is probably the max one would want to go?
Radii and diameters are on the log page, but, more conveniently:Eric Menchen wrote:I suppose I could measure the distances, or Julian could calculate them.
Code: Select all
13 glasses ⇒ radius ≈ 124.259pt ⇒ diameter ≈ 3.45″ ≈ 87.7mm
14 glasses ⇒ radius = 123pt ⇒ diameter ≈ 3.42″ ≈ 86.8mm
15 glasses ⇒ radius = 117.6pt ⇒ diameter ≈ 3.27″ ≈ 83.0mm
16 glasses ⇒ radius ≈ 110.055pt ⇒ diameter ≈ 3.06″ ≈ 77.7mm
18 glasses ⇒ radius ≈ 106.278pt ⇒ diameter ≈ 2.95″ ≈ 75.0mm
20 glasses ⇒ radius ≈ 103.565pt ⇒ diameter ≈ 2.88″ ≈ 73.1mm
21 glasses ⇒ radius ≈ 98.013pt ⇒ diameter ≈ 2.72″ ≈ 69.2mm
Eric Menchen wrote:And 21 is right out. They don't fit.
Agreed: 2¾″ > 2.72″.Eric Menchen wrote:The base diamter is 2¾", whereas the bowl appears to have a maximum diameter of 2½".
There are packings of 15 that are mathematically superior, but uglier.Eric Menchen wrote:15 glass seems like an inefficient layout, but it really isn't an issue.
Code: Select all
15 glasses ⇒ radius ≈ 118.28pt ⇒ diameter ≈ 3.29″ ≈ 83.5mm
Yes, well, it depends. The code tries all the patterns in PermittedPackingStyles, subject to its constraints and flags, and takes the one with the largest radius. On an infinite page hexagonal is indeed best, but, well, on an infinite page there would be an infinite amount of Port to drink, which would be ample for a weekend. One of the items in the default value of PermittedPackingStyles is [ /RectangularAlternateNudge /ImprovementPointsMin 2 ]. The “/ImprovementPointsMin 2” means that this is selected only if it improves the radius by at least 2pt ⇒ diameter improved by 0.055″ ≈ 1.4mm. The actual improvement for 15 on /USL2 is a mere 0.68pt of radius, so 0.02″ ≈ 0.48mm of diameter.Eric Menchen wrote:I thought the arrangement for 16 would work better than 15 because the glasses are round and a hex pattern gives more space between each
Code: Select all
On /A3 = 420mm×297mm:
13 glasses ⇒ radius ≈ 128.918 pt ⇒ diameter ≈ 3.58″ ≈ 91.0mm
14 glasses ⇒ radius ≈ 122.466 pt ⇒ diameter ≈ 3.40″ ≈ 86.4mm
15 glasses ⇒ radius ≈ 118.978 pt ⇒ diameter ≈ 3.30″ ≈ 83.9mm
16 glasses ⇒ radius ≈ 113.932 pt ⇒ diameter ≈ 3.16″ ≈ 80.4mm
18 glasses ⇒ radius ≈ 110.614 pt ⇒ diameter ≈ 3.07″ ≈ 78.0mm
19 glasses ⇒ radius ≈ 107.034 pt ⇒ diameter ≈ 2.97″ ≈ 75.5mm
20 glasses ⇒ radius ≈ 103.868 pt ⇒ diameter ≈ 2.89″ ≈ 73.3mm
21 glasses ⇒ radius ≈ 98.4921pt ⇒ diameter ≈ 2.74″ ≈ 69.5mm
With the glasses I tested, 18 was o.k. I wouldn't want to do 20.Andy Velebil wrote:So 16 is probably the max one would want to go?
Glenn, what are the base and max bowl diameters for the Marjorie Lumm glasses? As I recall, I spilled a little tawnyGlenn wrote:... but no one broke any glasses or spilled any Port so it didn't seem to be a problem.
I keep forgetting to measure these... I'll try to do it tomorrow.Eric Menchen wrote:Glenn, what are the base and max bowl diameters for the Marjorie Lumm glasses? As I recall, I spilled a little tawny
I looked at that picture, and I think there are only 18 circles on that placement. The second and fourth rows from the front only have four glasses. The first and third rows have four glasses, but five circles. Page 98 has a 20 glass layout.Glenn E. wrote:As you can see on page 110 of the newsletter (issue 87), the base fits easily into the circle on a 20-up 11 x 17 placemat. If you squint just right, you can see that the base is narrower than the widest part of the bowl as well.
Yes, you're right. I think I saw the empty "FTLOP" circle and mentally added it to all 4 rows instead of just the 2 that it's actually on.Eric Menchen wrote:I looked at that picture, and I think there are only 18 circles on that placement. The second and fourth rows from the front only have four glasses. The first and third rows have four glasses, but five circles. Page 98 has a 20 glass layout.Glenn E. wrote:As you can see on page 110 of the newsletter (issue 87), the base fits easily into the circle on a 20-up 11 x 17 placemat. If you squint just right, you can see that the base is narrower than the widest part of the bowl as well.
Provided late, but I have confirmed and verified that the current software has fixed the bug in GhostScript referenced by Eric. http://www.ps2pdf.com will once again convert with /inlinetitles true.Julian D. A. Wiseman wrote:That has been fixed. Sorry about that.Eric Menchen wrote:at one point I got hit by the bug/feature that required a huge amount of processing and prevented me from using some of the online PDF converters. And when I was using ghostscript, it was taking a long time with that version.
But I can see in your sweet-wine tasting that a more recent version would have had slightly more elegant output. Please update.